You can use the unit at any time with the manual controls.  Select the fan speed and duration and then “Start” and the Cama Cooler will run for that amount of time. 

The manual control serves as a temporary over ride while the schedule is running.  Once the run time is over the schedule resumes automatically

If the Cama Cooler is running during the schedule and you want to pause it, you can select “Pause” and duration and then “Start” and the Cama Cooler will pause for that amount of time.

If you change the time you go to bed and want the schedule to run at a different time, you can select “Run Schedule Now” and the schedule will start immediately.  The schedule will begin at the regularly scheduled time the following day. 

Choose the start time and time zone.

You can customize your schedule by using the 6 time slots.

You can choose a range of preset times and modes for each time slot.

The time slots run one after the other with the end time showing below.

Here you can adjust the actual fan speed for Low, Medium, and High.  

This allows for you to get just the right amount of air movement.

Breeze mode alternates between Low and Medium.  In the case shown here, the Bed Cooler would run for 31 min on Low, then 14 minutes on Medium, over and over for however long that mode is selected for in the schedule.

You will be notified when new software is available for the Bed Cooler.  

Use this screen to update by pressing the “Update Firmware” button and it will download and installed new updates from Bed Cooler.

You can also view the Firmware version installed, see the serial number, and WiFi MAC address of the device. 

Hidden below this area is a WiFi Settings reset button that you can use to erase the WiFi Settings if you plan on moving the Bed Cooler to a different wireless network.